Safe locksmith in Mililani for locked safes, lost combinations and keypads
A safe that refuses to open, a combination nobody wrote down, or a keypad gone blank? We come to the safe in Mililani or Wahiawa, explain plainly what opening it involves, and give you the price before anything starts.
Call (808) 517-5776What can a safe locksmith sort out for you?
Six kinds of safe work, all of it done where the safe stands. Tell us which sounds closest when you ring, and we quote from there.
Opening a locked safe
No code or key left? We try every non-destructive route first, but most locked safes end up being drilled. The drill only comes out once you agree.
Forgotten or lost combinations
A dial or keypad that nobody in the house can open any more. We look at the lock first, go over what can be tried for that model, and only then talk about drilling.
Changing a combination
New owner, a staff member gone, or a code that has been shared too widely. With the safe open, we set a fresh combination and you run it several times before we pack up.
Safe lock and keypad repair
Blank screen, beeps with no click, or a dial that spins loose. On keypads a flat battery is a frequent culprit, so we rule that out before repairing or swapping the lock.
Installing and bolting down
We anchor a new or relocated safe to the floor so nobody can simply carry it off. Let us know the floor type and the exact spot it will occupy.
Gun safes and home safes
Gun safes, fire safes and small home safes all get the same openings, new combinations, lock repairs and anchoring.
Where does the safe stand, and what is under it?
Safes turn up in closets, garages, spare rooms and back offices. Where yours sits and what holds it down shape the job.
What to tell us about the spot
| Where it sits | Tell us | Why it matters |
|---|---|---|
| On concrete | Garage or ground floor, rough size, and whether bolts already hold it | Old anchor bolts under the base must come out before a safe can move |
| On a wood floor | Which storey, and the floor covering | Bolts must reach the framing, so we locate it first |
| Shop or office | Business name in Mililani or Wahiawa, and who can approve the work | We open a business safe for its owner, or with the owner's OK |
| Left behind | Papers found with it, and who owns it now | With no combination on record, drilling becomes likely |
Unsure what the floor is? Say so, and we check before any anchor goes in.
Four ways a safe goes wrong, and your first step
-
Keypad blank and the door will not budge
No light, no beep. Swap in a fresh battery of the type the manual names before anything else.
Still shut? Stop entering codes: a run of wrong ones can lock the keypad out for a spell.
-
A firearm at home and no safe yet
Hawaii law (HRS §134-10.5) sets rules for storing firearms at home. Check the statute or ask a lawyer about your situation, then call us to bolt the safe down.
-
A locked safe that came with the house
Bought a home in Mililani with a safe in the closet, or cleared a parent's place? Search the paperwork for a combination, key or receipt, and note the maker and any serial number.
Then call; we confirm who owns the safe before booking an opening.
-
Cash safe and nobody has the code
A manager left with the only code. Check whether the lock has a manager-level code; many electronic safe locks do. If not, the owner calls us to book the opening.
Pricing for safe work
- Price quotedOn the phone first
- DrillingOnly with your OK
Size, lock type and whether drilling is needed all move the price, so there is no single figure. The figure is agreed on the phone while the van is still parked, and if the safe proves different on site, we stop and tell you first.
A safe job from first call to final check
Three stages, and no drill touches the safe without your yes.
You describe the safe
The maker if you can read it, dial or keypad, rough size, and where it stands. Mention whether it is bolted down.
Price agreed, van on its way
We quote on that call and phone again when the van is near. Keep anything that shows the safe is yours handy for when we arrive.
You try it before we leave
Once the safe is open, repaired or anchored, you work the combination or keypad yourself a few times, with the door open.
Safe opening and combination questions
Sometimes. A drill hole can often be plugged and the lock replaced, but on some safes, lighter home models especially, that repair is not worth it. We tell you which way it is leaning before any drilling begins.
Something that shows the safe is yours: a receipt, a deed to the home it sits in, or estate papers naming you. For a business safe, the owner or a person the owner names in writing.
It is one of the most common reasons. Many keypads take their battery from outside the door, through a cover or a pair of terminals. Fit a fresh one first. If the screen stays blank or the bolt still holds, call us.
Yes, provided the safe opens and its lock works. Dial and keypad locks both accept new combinations, and you try yours several times with the door open before it is shut.
Yes. We bolt safes down, including one that has just been moved in, into concrete or into the floor framing. We do not carry heavy safes between floors, so we anchor yours once it is in place.
Not a safe problem? We also take on:
Safe locked tight, or a keypad gone quiet?
Call with the maker, the lock type and where the safe stands in Mililani or Wahiawa. You hear the likely approach and the price before the van sets off.
(808) 517-5776. Phones open at 6 AM and close at 10 PM, all week.